Windows & Facades
The coating protects the surface from hard water, calcium build up, watermarks, sand and dirt. The water that hits the surface beads and rolls off taking the dirt with it, giving the surface a self-cleaning property.
Ceramic Pro on treated marble gets glossy and very liquid repellent. Once applied it protects the surface from all sorts of stains, scratches and at the same time allows the stone to breath. There is no need for waxes or sealants once the product is applied. The longevity is multiple years.
Strong can be applied to most wood surfaces. It can be used instead of oils, stains and sealants. The coating prevents UV rays and water from damaging the surface.
Train cars and wall paintings are targets for graffiti painters around the world. With a Ceramic Pro protective coating, graffiti paint will not bond to the surface and can be removed with a simple pressure wash.On train cars the coating also protects against brake sparks leaving marks on the cars.
Trucks & Excavators
The coating on these vehicles protects the exterior from all sorts of abuse and lowers maintenance costs substantially. Trucks become easy to clean as it prevents the material from sticking to the exterior.
Strong is used across all branches of the military to protect surfaces exposed to harsh environments. It protects high value assets ranging from sensors and cameras to offshore equipment and fighter jets from scratches, icing and corrosion.
Stainless steel is not always stainless. Our coating bonds to stainless steel and gives it additional protection and gloss when needed.
Ceramic Pro protects the aircraft from the extreme climates and contaminates. With multiple layers and the right maintenance Ceramic Pro will prevent rain erosion, sky drawl and icing. Once applied it will also reduce drag which saves fuel.
Ceramic pro is used to lower maintenance costs and protect all types of pipelines from corrosion. The surface gets so slick that dirt, oil and debris does not stick. This dramatically reduces maintenance cost.
Other Industries & Application
Below are some of the industries and surfaces we work with. Our line of products serves all surfaces that need any kind of protection. Automotive, Fabrics, Suede, Stainless steel, Counter tops, Sunglasses, Railings, Refrigerators, Exhaust pipes.
Application Heavy Industry
Strong can be applied with air guns, brushes or sponges. When working on surfaces where gloss is a factor, a wipe off procedure can be used to remove residue and avoid spots and streaks.
Allow Strong to air dry (ambient curing). Parts will be tack free after approximately 30 to 120 minutes. Until this point the coating is still wet and care should be taken to not bump or touch the parts. Parts will be partially cured after 24 hours and fully cured 5 to 7 days after application. The curing time can be reduced by the use of infrared heaters. Do not expose the surface to water within the first 24 hours.
The preparation of a substrate is crucial for maximum adhesion and performance. Swedish Standard (SIS 055900) Sa 2.5 – Sa 3: Blast cleaning is used to visually clean steel. The surface should be completely free from oil, grease, mill scale and rust. Steel Structures Painting Council, USA SSPC – SP – 5: When viewed without magnification, the surface shall be free of all visible oil, grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products and other foreign matter. Surface Profile (Anchor pattern) The height of surface profile (average peak to valley depth) is a factor in the performance of various coatings applied to steel. Strong is suitable for surfaces between 1 and 30 microns.