Automotive paint
The factory finish and any respray — sealed in a single layer, with the gloss left sharper than bare clear coat.
New from Ceramic Pro
What ONE does for your car
Bare paint is porous, and everything the road throws at it settles in. Ceramic Pro ONE seals the surface in a single layer, giving dirt, water and road grime far less to hold onto.
Because the hydrophobic structure runs through the whole coating rather than sitting on top of it, that performance doesn't wear off with the first few washes.
Product composition
A second layer exists to make up for what the first one lacks. Ceramic Pro ONE is built so there's nothing to make up for — the hydrophobic structure is distributed through the entire coating, and the bonding technology grips bare paint directly.
Conventional two-layer system Two-layer system
Ceramic Pro ONE Ceramic Pro ONE
01
Most coatings concentrate their water-repelling chemistry near the surface. ONE's 3D Hydrophobic Structure carries it through the full thickness of the layer.
02
Advanced bonding technology grips the paint directly, so the adhesion layer that two-part systems depend on isn't part of the equation.
03
Fewer layers means fewer variables in the install — and a finish that doesn't depend on two products curing correctly together.
How it compares
Where a bottle off the shelf and a typical professional coating land next to Ceramic Pro ONE.
DIY and typical professional figures are general category ranges and vary by product, preparation and care.
Surfaces it covers
Most coatings are formulated for paint and stop there. ONE is engineered for four different exterior surfaces, so a single product finishes the car.
The factory finish and any respray — sealed in a single layer, with the gloss left sharper than bare clear coat.
Trim, bumpers and unpainted panels — the surfaces that grey out and chalk first when they're left unprotected.
Coat over PPF to add hydrophobic performance and gloss on top of the film's impact protection.
Gloss, satin and colour-change wraps — protected without changing the finish the wrap was chosen for.
Four surfaces, one product, one layer. Professional installation on all of them.
Warranty & maintenance
The warranty is written at the product level, so it follows the coating on your vehicle rather than a package you bought. An annual maintenance inspection at a certified installer is what keeps it active.
Ceramic Pro ONE is installed only by certified professionals, and every application is registered when the work is completed.
Questions
The things people ask most about Ceramic Pro ONE. Anything else, your local certified installer can answer for your specific vehicle.
Ceramic Pro ONE is a true single-layer ceramic coating for cars. It is built on Ceramic Pro's 3D Hydrophobic Structure and advanced bonding technology, which together deliver gloss, water repellency and long-term protection from a single application rather than a multi-product system.
A second layer is normally there to compensate for something the first layer cannot do on its own — usually adhesion. ONE's bonding technology grips the surface directly, so that adhesion layer is not needed in most applications.
The hydrophobic performance is also distributed through the entire coating rather than concentrated near the surface, so the depth of the layer is working for you rather than just the top of it.
Automotive paint, exterior plastics, Paint Protection Film and vinyl wraps. That covers most of the exterior of a typical vehicle with one product, including wrapped and filmed cars that many coatings are not formulated for.
No. In most applications ONE bonds directly to the surface, so there is no dedicated base coat and no second product to cure alongside it. Your installer will confirm what a specific vehicle needs during prep.
Ceramic Pro ONE carries a seven-year warranty, written at the product level so it follows the coating on your vehicle. An annual maintenance inspection at a certified installer is what keeps that coverage active.
They are built for different jobs rather than ranked against each other. Ceramic Pro 9H is the multi-layer coating our packages are built around, where additional layers are applied to build up protection. Ceramic Pro ION is a two-part system — a base and a top coat working together — for owners who want the most layered protection available.
ONE is the single-layer option. It exists for people who want a professional coating with real longevity behind it, without a multi-product build. Your installer can walk through which one suits your vehicle and how you use it.
No — ONE is a professional-only product, installed by certified installers. Surface preparation is most of what determines how a coating performs, and the warranty depends on the work being done and registered correctly.
Get Ceramic Pro ONE
Tell us about your vehicle and we'll connect you with a certified Ceramic Pro installer in your area for a quote.
It takes about a minute. An installer will follow up directly.
Ceramic Pro ONE is applied by certified professionals only. Submitting this form doesn't commit you to anything.